|
'MAHR' MAKE
IMPORTED COMPUTERISED FORM TESTER MMQ-30 FOR ROUNDNESS AND
STRAIGHTNESS MEASURING INSTRUMENT |
|
Measurement Capability |
|
Minimum
I.D.
: 3 mm ø |
|
Maximum I.D.
: Between
2 - 200 mm. But OD of jobs not to exceed 220mm. |
|
Minimum Length
: 10 mm. |
|
Maximum Length
: 200 mm. |
 |
|
Formtester MMQ 30 For Roundness
and straightness Measurement 350 mm vertically with 180mm
probe infeed axis, Design/ Technical data as Per our Leaflet/
Catalogue serial no. 00001157 |
|
|
BA. MMQ 30 D/E/F/ SOFTWARE V3.1 (KOPIE) |
|
Evaluation Unit Form-PC
Controlling measuring and evaluation unit for the evaluation
of measurements made by MMQ 40/MMQ30/MMQ10 consist of |
|
Pentium-evaluation unit with hard
disk, 17" monitor, mouse x-times CD-ROM disk drive, 64 MB
RAM, On windows. |
|
Evaluation software form-PC to
filter, evaluate and document form and position
characteristics (DIN ISO 1101). |
|
Measuring Card for form
measurements with the form-PC |
|
Adapter unit to connect the
measuring card to the form-tester MMQ40/MMQ 30/MMQ 10/MMQ3. |
|
Current detailed performance scope
of the software and hardware according to separate
description. Sl. No. 00001497 |
|
Operating Instructions in English
language for Form-PC/MMQ40 |
|
Length Measuring Probe T6W with
110o adjustable angle, measuring range ± 1000 mm,
adjustable measuring force, reversible measuring direction
cable length 2 m for MMR /MFU / MMQ, Incl. Clamping sleeve and
probe arm 6850245 Sl. No. 00001617 |
|
Operating Instructions, English
for length measuring Probes T1W, T2W, T5W, T6W, T20L,
T22L,T30L |
|
|
RIM CHUCK, 100 MM With 6
reversible clamping jaws for internal and external chucking
with mounting flange |
|
|
CIYBTRT OAC JAGE 850 WIN 98
USA/International |
|
|
Probe Zenith Fine Adjustment For
Formtester MMQ 40/30 Range of Adjustment is ± 200 ym. |
|
|
Roundness Master High-Presision
measuring ball to check the measuring spindle Diameter
approx. 50 mm, roundness deviation 0.00004 mm Sl. No. 00011284 |
|
|
Cylinder square 1:250mm Diam.:80
mm |
|
|
Probe Arm set for T5W/T6W
consisting of each |
|
|
Probe arm, 90 mm, R0.75 |
|
|
Probe arm, 90 mm, M 2.5 |
|
|
Probe arm, 180 mm, M2.5 |
|
|
Probe arm, 10 mm, M2.5 |
|
|
(Probe balls made of tungsten carbide) |
|
|
Probe Mount for T5W/T6W on Formtester MMQ 40/30 |
|
|
ISO :
9001
|
|
Home